Jeep Strokers

Hi everyone

I've milled the cylinder head and looking for Rocker Arm Shims that is suitable for our jeeps, since both Crane and Hesco shims are discontinued, what folks now are using?

I’ve used shim kits for a late 302 Ford

Thanks @Russ for your feedback, I found those shims are they suitable for our engines?

https://aeroflowperformance.com/af95-90 ... ridge-shim

Dimensions of Each Shim
Outside Diameter: 14.25mm
Inside Diameter: 8.20mm
Thickessof Thin Shim: 1/64" (0.50mm)
Thickness of Thick Shim:3/64" (1.00mm)

I don’t see any reason why they wouldn’t work.