Building a 4.2 mini stroker
-
Bittersweetfox
- Posts: 3
- Joined: February 12th, 2017, 4:12 pm
Building a 4.2 mini stroker
My 99 xj needs an engine.. So I tore my 96 xj 4.0 down. After talking to Russ a little I'm convinced I "need" a stroker haha. I'm leaning towards the 677 pistons due to making my compression ratio too high and needing premium. Any thoughts?
-
Cheromaniac
- I live here

- Posts: 3290
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
Re: Building a 4.2 mini stroker
If you're on a limited budget, a 4.1/4.2 mini-stroker would be cheaper to build but a 4.6/4.7 stroker would give you at least 12% more torque. How much are you willing to spend?
1992 XJ 4.6 I6 Stroker - 5MT - 200rwhp 258rwtq - Sold
-
Bittersweetfox
- Posts: 3
- Joined: February 12th, 2017, 4:12 pm
Re: Building a 4.2 mini stroker
I don't wanna spend too much. This is my daily driver not a toy. In theory the 4.2 should be economical on fuel also.