Just curious but would the Clifford intake that is meant for the carbed 4.0s work with efi with some figuring out. and if so would it really do anything different and or better than the newer model intake manifold?
http://www.shop.cliffordperformance.net ... 4520WH.htm
Clifford intake manifold?
-
MunkMaster
- Donator
- Posts: 31
- Joined: March 24th, 2017, 8:18 am
- Vehicle Year: 1996
- Vehicle Model: Cherokee
-
Cheromaniac
- I live here
- Posts: 3290
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
Re: Clifford intake manifold?
You could potentially adapt that manifold for EFI, but why bother when you can get an '00+ intake for a fraction of the cost? You could do the reverse and adapt the late model intake for a carb set-up.
1992 XJ 4.6 I6 Stroker - 5MT - 200rwhp 258rwtq - Sold 
-
MunkMaster
- Donator
- Posts: 31
- Joined: March 24th, 2017, 8:18 am
- Vehicle Year: 1996
- Vehicle Model: Cherokee
Re: Clifford intake manifold?
That's the route I am going I was just a little curious. I always liked the settup that we're just a little different than the rest.
-
jeepman
- Making Progress
- Posts: 77
- Joined: April 26th, 2010, 8:23 am
- Stroker Displacement: 4.7
- Vehicle Year: 1989
- Vehicle Make: Jeep
- Vehicle Model: MJ
- Location: Hamilton ON CANADA
Re: Clifford intake manifold?
Yes easy enough if you want to go Fuel injected but not do a complete conversion...
If I were to build a CJ again with a 4.0L stroker conversion I would go with this FAST EFI kit...
FAST EFI page
http://www.fuelairspark.com/fas/ez-efir ... ystemhtml/
If I were to build a CJ again with a 4.0L stroker conversion I would go with this FAST EFI kit...
FAST EFI page
http://www.fuelairspark.com/fas/ez-efir ... ystemhtml/