Pulling engine with A/C?
-
gkesseru
- Posts: 4
- Joined: October 12th, 2026, 9:18 am
- Vehicle Year: 2002
- Vehicle Make: Jeep TJ
- Vehicle Model: Sport
Pulling engine with A/C?
I have a 2002 TJ 4.0 with A/C compressor on driver side. Has anyone replaced this engine without taking the A/C apart?
-
derf
- Posts: 7
- Joined: November 23rd, 2020, 9:12 am
- Stroker Displacement: 242
- Vehicle Year: 1987
- Vehicle Make: Jeep
- Vehicle Model: Comanche
Re: Pulling engine with A/C?
It's difficult. The condenser is in the grille.
You can remove the accessories and may be able to pull the radiator and condenser out. But hoses may be routed through a hole, making that a lot more difficult. And there's a lot of hard line that doesn't like to move too much. So it may not even be an option .
Look at the compressor and see how much rubber hose is there so that you can move the compressor. If it's all hard line in the area, pretty much all you can do is take it apart.
At least it's an opportunity to replace seals and get a full recharge.
You can remove the accessories and may be able to pull the radiator and condenser out. But hoses may be routed through a hole, making that a lot more difficult. And there's a lot of hard line that doesn't like to move too much. So it may not even be an option .
Look at the compressor and see how much rubber hose is there so that you can move the compressor. If it's all hard line in the area, pretty much all you can do is take it apart.
At least it's an opportunity to replace seals and get a full recharge.
1987 MJ project: 4.6/AW4/ORD Magnum Box/Ford NP205/Dana Super 60/Dana 80/40's
2001 XJ: 4.0/AW4/NP242/D30/D44/32's
My gear ratio calculator: http://www.grimmjeeper.com/gears.html
2001 XJ: 4.0/AW4/NP242/D30/D44/32's
My gear ratio calculator: http://www.grimmjeeper.com/gears.html